Wee Trees Bonsai Help Forum Advice for all http://weetrees.co.uk/phpBB3/ |
|
A little bit of turning http://weetrees.co.uk/phpBB3/viewtopic.php?f=4&t=18015 |
Page 1 of 3 |
Author: | Cuchilo [ 14 Sep 2018, 12:34 ] |
Post subject: | A little bit of turning |
I've become very close to this piece , it came out of the lathe and hit me in the face ,neck and shoulder at about 2200RPM image by Jason, on Flickr |
Author: | daryl [ 14 Sep 2018, 12:44 ] |
Post subject: | Re: A little bit of turning |
Blimey! Are you still alive? |
Author: | Gary Jones [ 14 Sep 2018, 12:54 ] |
Post subject: | Re: A little bit of turning |
Ouch |
Author: | Cuchilo [ 14 Sep 2018, 13:25 ] |
Post subject: | Re: A little bit of turning |
I managed to start ducking at 2500 RPM Putting it back in the lathe to finish the job wasn't fun but i think i won the battle of the 4x4 . |
Author: | Gary Jones [ 14 Sep 2018, 14:12 ] |
Post subject: | Re: A little bit of turning |
Lovely ornate soil dibber btw. Have you got onions to plant? |
Author: | keithmart [ 14 Sep 2018, 14:19 ] |
Post subject: | Re: A little bit of turning |
Hi I trust you had your safety gear on |
Author: | darreng [ 14 Sep 2018, 14:47 ] |
Post subject: | Re: A little bit of turning |
Hope you don't take a turn for the worse... TURN FOR THE WORSE lol |
Author: | Sizzla [ 14 Sep 2018, 14:54 ] |
Post subject: | Re: A little bit of turning |
Glad the woods ok |
Author: | Cuchilo [ 14 Sep 2018, 16:35 ] |
Post subject: | Re: A little bit of turning |
keithmart wrote: Hi I trust you had your safety gear on Yes , the steel toe capped boots and goggles worked a treat |
Author: | Sizzla [ 14 Sep 2018, 18:29 ] |
Post subject: | Re: A little bit of turning |
darreng wrote: Hope you don't take a turn for the worse... TURN FOR THE WORSE lol I don't get it |
Page 1 of 3 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |